S1065 General Purpose Solenoid Valve
Brass solenoid valve with 1.8 mm orifice and Viton diaphragm for water, air and gas; 1/8"–1/4", 0–10 bar, up to 160 °C.
A general purpose solenoid valve with brass body and stainless steel tube and plunger; direct acting in 1/8" and 1/4" and pilot operated in 3/8"–2". It is used on air, water and gas lines; IP68 and ATEX explosion-proof coils are available.
| Application | Air, water, gas |
|---|---|
| Port size | 1/8", 1/4" direct acting; 3/8"…2" pilot operated |
| Working pressure | 0…16 bar (1/8", 1/4"); 0.5…16 bar (3/8"...2") |
| Tube, plunger | Stainless steel |
| Body material | Brass |
| Diaphragm | NBR; EPDM, Viton, PTFE on request |
| Media temperature | -20 °C…80 °C |
| Position | Normally closed |
| Coil voltage | 230V, 110V, 48V, 24V, 12V AC; 110V, 48V, 24V, 12V DC |
| Protection class | IP65, IP68 (tested 72 hours under water at 10 m), optional ATEX explosion-proof |
Brass solenoid valve with 1.8 mm orifice and Viton diaphragm for water, air and gas; 1/8"–1/4", 0–10 bar, up to 160 °C.
Normally closed brass solenoid valve with integrated strainer for water, air and gas; 3/8"–2", 0.5–16 bar, up to 160 °C.
Servo assisted, normally closed brass solenoid valve for non-flammable air, water and gas; 1/4"–2", operates from 0 bar.
1/2" brass solenoid valve designed against water hammer for water, light oil, air and inert gases; 14.5 mm orifice, 0.5–20 bar.