S1065 General Purpose Solenoid Valve
Brass solenoid valve with 1.8 mm orifice and Viton diaphragm for water, air and gas; 1/8"–1/4", 0–10 bar, up to 160 °C.
A general purpose solenoid valve with brass body and stainless steel tube and plunger; its servo assisted design allows operation from 0 bar differential pressure. It is used on non-flammable air, water and gas lines; IP65, IP68, ATEX explosion-proof and flameproof coil options are available.
| Application | Air, water, gas (non-flammable) |
|---|---|
| Port size | 1/4"...2" BSP standard; NPT on request |
| Working pressure | 0...16 bar (1/4"…1"); 0...3 bar (1 1/4"…2") |
| Tube, plunger | Stainless steel |
| Body material | Brass |
| Diaphragm | NBR; EPDM, Viton on request |
| Working temperature | -20 °C…80 °C |
| Position | Normally closed |
| Coil voltage | 230V, 110V, 48V, 24V, 12V AC; 110V, 48V, 24V, 12V DC |
| Protection class | IP65 standard (C40 series coil) · IP68 (C42 coil, tested 72 hours under water at 10 m) · IP67 ATEX explosion-proof (C41 series coil) · IP67 flameproof (C43 series coil) |
Brass solenoid valve with 1.8 mm orifice and Viton diaphragm for water, air and gas; 1/8"–1/4", 0–10 bar, up to 160 °C.
Normally closed brass solenoid valve with integrated strainer for water, air and gas; 3/8"–2", 0.5–16 bar, up to 160 °C.
1/2" brass solenoid valve designed against water hammer for water, light oil, air and inert gases; 14.5 mm orifice, 0.5–20 bar.
Normally closed solenoid valve with NSF-compliant brass body for water; 1/8"–2", 0–16 bar.