LV Level Gauge and Switch
Tank level gauge with transparent tube; 127 or 254 mm axle base, versions with thermometer (LVT) and min. level contact (LVSE), max. 2 bar.
Product code: SCL3
Level sensor for conductive water-based fluids; changeover contact, 1/2" BSP male, 24 V DC, ± 2 mm repeatability, max. 10 bar.
The SCL3 series is a conductive level sensor that switches a changeover contact when a conductive fluid closes the circuit between the emitter and the receiver at the centre of the threaded connection. It signals minimum and maximum levels of water-based fluids in a tank; it is not for use with dielectric oils.
| Max. pressure | 10 bar |
|---|---|
| Connection | 1/2" BSP male |
| Body | Brass (AISI 316L optional) |
| Power supply | 24 V DC ± 10% (12 V DC optional) |
| Contact load | 1 A / 24 V DC |
| Repeatability | ± 2 mm |
| Working temperature | -10 °C … +80 °C |
| Protection | IP65 |
| Code | Description |
|---|---|
| M3 | 30x30 mm connector |
| M2 | 16x16 mm connector |
| M12 | M12x1 connection |
| M4 | Connector with LED signal |
Tank level gauge with transparent tube; 127 or 254 mm axle base, versions with thermometer (LVT) and min. level contact (LVSE), max. 2 bar.
Compact float level switch; LVO horizontal (M16x1.5, plastic), LVI vertical (1/4" BSP, brass), reed contact, IP67, 20 bar.
Vertical float level switch; rod length from 100 mm in 50 mm steps, reed changeover contact, optional built-in thermostat.