LVO – LVI Float Level Switch
Compact float level switch; LVO horizontal (M16x1.5, plastic), LVI vertical (1/4" BSP, brass), reed contact, IP67, 20 bar.
Product code: LV
Tank level gauge with transparent tube; 127 or 254 mm axle base, versions with thermometer (LVT) and min. level contact (LVSE), max. 2 bar.
The LV series is a level gauge that shows the fluid level in a tank through a transparent tube. Versions with thermometer (LVT) and with changeover minimum-level contact (LVSE) are available; O-rings seal on uneven surfaces and the movable terminals compensate hole spacing errors up to +4 mm.
| Axle base | 127 mm or 254 mm (special up to 2.5 m) |
|---|---|
| Max. working pressure | 2 bar |
| Mounting | Two M12 threaded holes or two Ø13 mm holes, vertical |
| Materials | Glass-fibre reinforced nylon heads, anodized aluminium guard, Perbex tube |
| Working temperature | -20 °C … +80 °C (LVSE: +5 °C … +80 °C) |
| Contact load (LVSE) | 0.5 A / 48 V AC/DC |
| Protection (LVSE) | IP65 |
| Model | Description | Connection | Axle base |
|---|---|---|---|
| LVT2 | Level gauge | M12 | 127 mm |
| LVT3 | Level gauge | M12 | 254 mm |
| LVSE2 | Level switch - NO-NC | M12 | 127 mm |
| LVSE3 | Level switch - NO-NC | M12 | 254 mm |
| Code | Description |
|---|---|
| T | With thermometer |
| SE | With changeover contacts |
| 2 | Axle base 127 mm |
| 3 | Axle base 254 mm |
| MAX | Maximum level signal |
Compact float level switch; LVO horizontal (M16x1.5, plastic), LVI vertical (1/4" BSP, brass), reed contact, IP67, 20 bar.
Vertical float level switch; rod length from 100 mm in 50 mm steps, reed changeover contact, optional built-in thermostat.
Level sensor for conductive water-based fluids; changeover contact, 1/2" BSP male, 24 V DC, ± 2 mm repeatability, max. 10 bar.