Hydraulic upgrade on a sheet-metal press line

Oil leaks and hose failures were eliminated on a press line and die-change time was shortened.

Problem

A hydraulic press line producing sheet-metal parts for the automotive supply chain was seeing rising maintenance costs and downtime.

  • Oil leaks: Hoses and fittings replaced at different times with mismatched pressure ratings leaked constantly, creating an extra cleaning burden.
  • Hose bursts: Pressure spikes from press strokes caused sudden failures in chafed and kinked hoses.
  • Dirty, hot oil: Poor filtration caused sticking valves, and overheating oil wore seals out early.
  • Slow die changes: Dies were bolted by hand, so the press stood idle for a long time at every model change.
Solution
  • Hose and fitting inventory: Every hose on the line was measured and listed on site; spiral hoses and fittings matching the working pressure and impulse load were selected for each line.
  • On-site crimping and labelling: Hoses were crimped to size and delivered with code labels, so replacements can be ordered quickly by the same code.
  • Mechanical protection: Hose guards were fitted at chafe points, with correct bend radii and clamping in moving areas.
  • Filtration and cooling: A pressure-line filter, a separate offline filtration circuit and an oil cooler were added; oil analysis monitoring was introduced.
  • Hydraulic die clamping: Die-clamping cylinders and control valves now allow dies to be clamped and released from a single point.
Result
  • No visible oil leaks remain on the line; oil top-ups dropped significantly.
  • Sudden hose-related stoppages were eliminated; replacements moved into the planned maintenance schedule.
  • Die-change time was cut by more than half compared with manual bolting.
  • Clean, cool oil reduced valve failures and extended oil-change intervals.