Hydraulic cylinder overhaul at a continuous casting plant

An overhaul and spares programme was set up for cylinders working under heat and steam; lead time fell from weeks to days.

Problem

On the continuous caster, the hydraulic cylinders clamping the segment rolls and driving mould oscillation were working in very harsh conditions.

  • Heat and steam: High ambient temperature and steam from cooling water quickly wore seals and rod surfaces.
  • Leakage and loss of position: Internally leaking cylinders could not hold clamping force, putting casting quality at risk.
  • Long lead times: Original spare cylinders took weeks to arrive from abroad, leaving the plant running at risk in the meantime.
  • Unplanned replacement: Cylinders were only removed after failing, and no overhaul records were kept.
Solution
  • Diagnosis and measurement: Removed cylinders were dismantled and measured; wear causes and critical dimensions were documented.
  • Overhaul: Damaged rods were renewed and hard-chrome plated, barrels were honed, and seal kits resistant to heat and water were used.
  • Testing: Every cylinder passed pressure and internal-leakage tests above working pressure on a test bench before installation.
  • Equivalent manufacturing and spares pool: Dimensionally matched equivalents of critical cylinders were prepared and a rotating pool of spare cylinders was set up for the plant.
  • Renewed connections: Hoses and fittings feeding the cylinders were replaced with heat-rated ones and protected with heat shields.
Result
  • Spare cylinder lead time fell from weeks to a few days; with a ready spare, replacement fits into a single stop.
  • The new seal kits noticeably extended cylinder maintenance intervals.
  • Clamping force became stable, reducing cylinder-related quality deviations.
  • Each cylinder's overhaul history is recorded and replacements follow a planned maintenance schedule.