PTFE-Coated Pneumatic Actuators
Rack and pinion pneumatic actuator with PTFE-coated exterior for corrosive environments.
Rack and pinion pneumatic actuator with PTFE-coated exterior for corrosive environments.
ATEX rack and pinion pneumatic actuator for hazardous areas; RX 32…RX 350 DA/SR, 4–8 bar, 9–5162 Nm at 6 bar, ISO 5211.
Low-temperature pneumatic actuator designed for valve automation in cold ambient conditions.
Hygienic pneumatic actuator with AISI 316 stainless steel body for food and chemical industries; DN25…DN150 valves, 4–7 bar, NBR seals.
Scotch yoke gas-over-oil actuator operated by pressurised gas and hydraulic oil; for oil, natural gas and petrochemical pipelines.
Stainless steel pneumatic rotary actuator for aggressive and offshore environments; 25–1080 Nm at 6 bar, -48…80 ºC, SIL3 and ATEX.
Glass-fibre reinforced polyamide pneumatic actuator for aggressive environments; 17–165 Nm at 6 bar, -32…90 ºC, SIL3 and ATEX.
Scotch yoke pneumatic actuator; RASY 32…200 DA / 40…200 SR, 4–8 bar, 11–6000 Nm at 6 bar, ISO 5211, NAMUR accessory interfaces.
60 Nm on-off electric actuator with glass-fibre reinforced PA66 housing; IP65, 90-240 V AC / 24 V AC/DC, ISO 5211 F03/F05/F07.
Compact rotary electric actuator with 40 Nm torque; 12/24 VDC motor, IP65 (IP67 option), 11 s open/close time, ISO 5211 F03/F05.
Rotary electric actuator with 60 and 80 Nm torque; IP67/IP68, ATEX Ex II 2G (Zone 1-2) option, ISO 5211 F03/F05/F07 mounting.
Rotary electric actuator with 150 and 200 Nm torque; IP67 (IP68 option), 14–16 s open/close time, ISO 5211 F03/F05/F07 mounting.