S8814 Solenoid Valve for Oxygen and Hydrogen Gas
Normally open solenoid valve with brass body for oxygen, hydrogen and non-aggressive media; 3/8"–1", 0.5–40 bar.
The S8810 Series Solenoid Valve for Oxygen and Hydrogen Gas is a normally closed solenoid valve for oxygen and hydrogen gas. It is used to control oxygen and hydrogen gas lines; a strainer at the valve inlet is recommended for contaminated media.
| Application | Oxygen, hydrogen, O2, H2, gas (a strainer at the valve inlet is recommended for contaminated media). |
|---|---|
| Port size | 1/8", 1/4" direct acting, 3/8"…2" pilot operated, BSP (optional NPT) |
| Operating pressure | 0.5…16 bar (3/8"…2"); 0…16 bar (1/8", 1/4") |
| Armature tube, plunger | Stainless steel |
| Body material | Brass |
| Diaphragm | NBR, optional EPDM or Viton |
| Fluid temperature | -20°C…80 °C |
| Position | Normally closed |
| Coil voltage | 230V, 110V, 48V, 24V, 12V AC; 110V, 48V, 24V, 12V DC |
| Protection class | IP65 (optional Ex-proof) |
Normally open solenoid valve with brass body for oxygen, hydrogen and non-aggressive media; 3/8"–1", 0.5–40 bar.
Normally open solenoid valve with brass body for oxygen and hydrogen gas; 1/8"–2", 0–14 bar.
Normally closed solenoid valve with brass body for oxygen and hydrogen gas; 3/8"–1", 0.5–40 bar.