S8110 Drain Solenoid Valves
Normally closed drain solenoid valve with brass body for water, air and gas; 1/8"–1", 0.5–16 bar.
The K-MD Series is an electronic drain valve that discharges condensate from compressed air tanks without air loss. It has a 2/2-way direct acting solenoid valve, an integrated mesh strainer and a test function; the body is corrosion-resistant aluminium.
| Type | K-MD Series, zero air loss electronic drain valve |
|---|---|
| Max. compressor capacity | 10 m³/min |
| Operating pressure | 0–16 bar |
| Solenoid valve type | 2/2-way, direct acting |
| Orifice diameter | 2 mm |
| Seal material | FPM (Viton) |
| Inlet connection | 1/2" (BSP or NPT) |
| Internal height | 7.4 cm |
| Outlet connection | 1/4" BSP |
| Fluid temperature | 1–50 °C |
| Ambient temperature | 1–50 °C |
| Supply voltage | 230 V AC / 115 V AC / 24 V AC / 24 V DC |
| Electrical connection | DIN 43650-B |
| Serviceable valve | Yes |
| Test function | Yes |
| Protection class | IP65 (NEMA 4) |
| Integrated mesh strainer | Yes |
| Body material | Corrosion-resistant aluminium, EP-coated |
Normally closed drain solenoid valve with brass body for water, air and gas; 1/8"–1", 0.5–16 bar.
Normally closed drain solenoid valve with brass body for water, air and gas; 3/8"–1", 0.15–16 bar.
Timer relay controlling drain solenoid valves on pressure vessels and filters; 0.5–45 min interval, 0.5–10 s discharge time.
Magnetically controlled drain valve discharging condensate from compressed air systems without air loss; 0–16 bar, 200 l/h.