S8011 Series Normally Open 0-0.5 bar Natural Gas Manual Reset Solenoid Valve
Normally open 0–0.5 bar natural gas manual reset solenoid valve for building entries; works with gas detectors (230 V AC) or seismic sensors (12 V DC).
The S8018 is a normally open manual reset solenoid valve installed at the natural gas entry of buildings, workplaces, workshops and factories. It shuts off gas on a control signal and is reopened by manual reset.
| Application | Natural gas, LPG |
|---|---|
| Area of use | Natural gas entry of buildings, workplaces, workshops, factories |
| Port size | 1/2", 3/4" |
| Working pressure | 0 bar .... 6 bar |
| Armature tube, plunger | Stainless steel, brass |
| Body material | Brass |
| Diaphragm | NBR |
| Operating temperature | -20 °C....60 °C |
| Position | Normally open |
| Coil voltage | 230 V AC, 110 V, 24 V, 12 V AC/DC (IP65 and Ex-proof) |
Normally open 0–0.5 bar natural gas manual reset solenoid valve for building entries; works with gas detectors (230 V AC) or seismic sensors (12 V DC).
Normally open brass-body manually reset solenoid valve for natural gas, LPG and non-corrosive gases; 1/2"…3/4", 0…6 bar.
Normally closed brass-body solenoid valve for gases and liquids; G 1/8"–1/4", 1.8/2.5 mm orifice, 0…14 bar, -20…160°C.
Normally closed 0–0.5 bar natural gas manual reset solenoid valve for building entries; works with gas detectors (230 V AC) or seismic sensors (12 V DC).