BECK 901 Adjustable Pressure Switch
Adjustable low-pressure switch with NBR, silicone, Viton or EPDM diaphragm options and contacts rated up to 6.5 A/250 VAC.
BECK 911.81X is a differential pressure switch for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases; typical uses include monitoring air filters and fans, overheating protection for fan heaters, flow monitoring in ventilation ducts and frost protection for heat exchangers. Without a scale, the switching pressure is set very precisely via the central adjusting screw using a screwdriver and a pressure gauge; values apply to vertical installation and are approx. 20 Pa higher when mounted horizontally.
| Applications | Monitoring air filters and fans · Overheating protection for fan heaters · Flow monitoring in ventilation ducts · Frost protection for heat exchangers |
|---|---|
| Adjustment | No scale; switching pressure and differential set via central adjusting screw (as for Series 930.8x Climair) |
| Installation | Values apply to vertical installation; approx. 20 Pa higher when mounted horizontally |
| Max. operating pressure | 10 kPa for all pressure ranges |
| Operating temperature | -20 °C … +85 °C (-20 °C … +60 °C for EC Gas Appliances Directive) |
| Storage temperature | -40 °C … +85 °C |
| Diaphragm material | Silicone; NBR on request |
| Pressure connections | 2 pipe connection pieces (P1 and P2), outer diameter 6.0 mm; P1 higher pressure (+), P2 lower pressure (-) |
Adjustable low-pressure switch with NBR, silicone, Viton or EPDM diaphragm options and contacts rated up to 6.5 A/250 VAC.
Adjustable differential pressure switch with silicone diaphragm for air and non-combustible, non-aggressive gases; max. 10 kPa.
Factory-set pressure switches for vacuum, pressure and differential pressure; control range from -700 mbar to 12 bar.