TORK-EX.SL10.P Series ATEX Certified Float Level Switch for Bulk Solids
ATEX-certified suspended level switch for high-level detection of bulk solids in silos and bunkers in Zone 20/21/22 dust areas.
BA series cable level switches are used for level control in tanks with small access openings. Switching within a ±20° angle, they provide precise level control over a short span and can be inserted into the tank through a 1" wide opening.
| Advantages | Slim design for easy installation from outside the tank · Precise level detection · Easy installation and use · Environmentally friendly contact, free of mercury and lead · Shape prevents jamming or failure · Maintenance-free |
|---|---|
| Contact | 3-wire, normally open or normally closed |
| Switching angle | ±20° |
| Applications | Clear, sediment-free water, clean water, rainwater; weak acidic liquids, oils, fuel oil, paint, sludge, mud etc. · Level control at different points in a tank · Tank low and high level control · Filling and emptying · Systems requiring switching in confined spaces over short distances |
ATEX-certified suspended level switch for high-level detection of bulk solids in silos and bunkers in Zone 20/21/22 dust areas.
Cable float level switch with copolymer polypropylene body for water and similar liquids; 10(4) A, 250 VAC, IP68.
Cable float level switch with double-conical float and mercury/lead-free contact; for clean water, rainwater and septic tanks.
Cable float level switch with copolymer PP body; 16(6) A, 12–250 VAC/VDC, max. 3.5 bar, 85 °C, IP68.