TORK-EX.SL10.P Series ATEX Certified Float Level Switch for Bulk Solids
ATEX-certified suspended level switch for high-level detection of bulk solids in silos and bunkers in Zone 20/21/22 dust areas.
SA400 Series cable level switches can be used in hazardous zones 0, 1, 2 (gas) and 20, 21, 22 (dust). Float and cable are produced by HR-HY (high-resistance) vulcanised press moulding; the double-sealed float switches when it tilts by ±25°.
| Advantages | ATEX certified for hazardous areas · Double watertight float housing, HR-HY acid-resistant material · Easy installation and use · Environmentally friendly contact, free of mercury and lead · Shape prevents jamming or failure · Maintenance-free |
|---|---|
| Contact | 3-wire, normally open or normally closed |
| Switching angle | ±25° |
| Ex zones | 0, 1, 2 (gas); 20, 21, 22 (dust) |
| Applications | Aggressive liquids, acids, solvents, corrosive liquids, hydrocarbons, seawater in hazardous areas · Pump level control in hazardous areas · Emptying and filling systems · Overflow prevention, high and low level alarms in tanks |
ATEX-certified suspended level switch for high-level detection of bulk solids in silos and bunkers in Zone 20/21/22 dust areas.
Cable float level switch with copolymer polypropylene body for water and similar liquids; 10(4) A, 250 VAC, IP68.
Cable float level switch with double-conical float and mercury/lead-free contact; for clean water, rainwater and septic tanks.
Cable float level switch with copolymer PP body; 16(6) A, 12–250 VAC/VDC, max. 3.5 bar, 85 °C, IP68.