FLOMID Electromagnetic Flowmeter
Electromagnetic flowmeter DN3–DN500, 10 l/h–6000 m³/h, ±0.5 % accuracy; wafer, flanged, DIN 11851 or clamp connection.
These electromagnetic flowmeters measure the flow of conductive liquids without requiring straight inlet or outlet pipe runs. With ebonite or PTFE lining, a wide size range and multiple output options, they suit water, wastewater and process applications.
| Size | DN50 … DN3000 |
|---|---|
| Measuring range | 0.2 … 12 m/s |
| Accuracy | ±0.5 % or ±0.2 % (of measured value) |
| Process temperature | Ebonite: -10 °C … +60 °C; PTFE: -20 °C … +150 °C |
| Fluid conductivity | >5 μS/cm (>20 μS/cm for demineralised water) |
| Process pressure | PN10, PN16, PN25, PN40, PN63, PN100 (depending on pipe size) |
| Power supply | 85–265 VAC, 50–60 Hz; 24 VDC; optional battery |
| Output signal | Pulse, frequency, RS485 Modbus, 4–20 mA (optional HART) |
| Alarm output | 1× passive pulse (12–36 VDC, 100 mA, 1.5 kΩ); empty pipe, sensor fault or limit exceedance (selectable) |
| Straight pipe run | Not required |
| Display | 4-key, 3-line, 30-character LCD |
| Options | Stainless steel housing · Loose flange · Wafer design |
Electromagnetic flowmeter DN3–DN500, 10 l/h–6000 m³/h, ±0.5 % accuracy; wafer, flanged, DIN 11851 or clamp connection.
Electromagnetic flowmeter running 3–6 years on a 3.6 V lithium battery; DN3–DN800, ±0.2/0.5 % accuracy, up to IP68.
Insertion electromagnetic flowmeter for DN40–DN2000 pipes; 2.3–110,000 m³/h, ±3.5 %, 4–20 mA/pulse/relay outputs.
Electromagnetic flowmeter DN10–DN1000, 0.03–10 m/s, ±0.5 %; PTFE, PA or hard rubber lining, 4–20 mA/pulse/relay outputs.