LF1010 Conductivity Meter
Panel conductivity meter with red LED display, SPDT relay output, 230/115/24 V supply and Pt100/Pt1000 input; IP65.
LF9648 is a conductivity meter for DIN 96x48 mm panel mounting. In addition to measuring conductivity and temperature, it provides control and signal transmission via relay, transistor and analog outputs.
| Supply voltage | 230 V AC ±10 %; 115 V AC ±10 %; 24 V AC ±10 % or 24 V DC ±15 % |
|---|---|
| Power consumption | Max. 3.5 VA, 5 VA with analog output |
| Operating temperature | -10...+55 °C |
| CE conformity | EN 55022, EN 60555, IEC 61000-4-3/4/5/11/13 |
| Measuring range (conductivity) | 0...2.000 (0) µS/cm; 0...2000/200(0) mS/cm (at 25 °C) |
| Cell constant | 0.080...9.999 |
| Accuracy (conductivity) | 0.5 % of measured value, ±2 digits |
| Measuring range (temperature) | -50...+200 °C, Pt100 or Pt1000 sensor |
| Accuracy (temperature) | ±0.2 °C |
| Display | Red LED, 14.2 mm |
| Relay output | SPDT < 250 V AC < 250 VA < 2 A; < 300 V DC < 50 W < 2 A |
| Transistor output | < 35 V AC/DC, max. 100 mA, short-circuit protected |
| Analog output (active) | 0/4...20 mA, load < 500 Ω; 0/2...10 V, load > 500 Ω, isolated; automatic switchover (load dependent) |
| Analog output (passive) | 4...20 mA; load RA [Ω] < (supply - 5 V) ÷ 0.02 A; supply voltage 5...30 V DC |
| Analog output accuracy | 0.1 %; TC 0.01 %/K |
| Housing | DIN 96x48 mm panel mounting, PA6-GF material; UL94V-0 |
| Dimensions | Front 96x48 mm, mounting depth 100 mm |
| Weight | Max. 390 g |
| Electrical connection | Screw terminals, 0.08...1.5 mm², AWG28...AWG14 |
Panel conductivity meter with red LED display, SPDT relay output, 230/115/24 V supply and Pt100/Pt1000 input; IP65.