PL1010 Series Pulse Jet Valves
Normally closed pulse jet valve with aluminium body for baghouse dust collectors; 3/4"–3", 0.5–8 bar, IP65 (IP68 optional).
It injects compressed air (min. 1.5 bar) into the container, creating a thin air layer between the material and the wall that keeps the material moving during discharge; when the container is empty it vibrates slightly and cleans itself. It is used for fast, uniform discharge of products such as bentonite, ash, flour, cement, feldspar, soda, kaolin, aluminium and titanium dioxide.
| Operating principle | Compressed air (min. 1.5 bar) injected into the container forms a thin layer between material and wall · Vibrates slightly and self-cleans when the container is empty · Works most effectively with intermittent air supply; air should be supplied while the discharge outlet is open · At rest, the material mass and flexible conical rubber prevent material from entering the air line |
|---|---|
| Application | Bentonite, ash, flour, cement, feldspar, soda, kaolin, aluminium, titanium dioxide, etc. |
Normally closed pulse jet valve with aluminium body for baghouse dust collectors; 3/4"–3", 0.5–8 bar, IP65 (IP68 optional).
Normally closed pulse jet valve with aluminium body for baghouse dust collectors; 3/4"–3", 0.5–8 bar, NBR/Viton/thermoplastic diaphragm.
ATEX pulse jet valve with thermoplastic diaphragm for dust collectors in explosive atmospheres; 3/4"–1 1/2", 0.5–8 bar.
Normally closed pulse jet valve with aluminium body for baghouse dust collectors; 3/4"–3", 0.5–8 bar, IP65 (IP68 optional).