TORK-PAV 901 Pneumatically Actuated Brass Ball Valve
Pneumatically actuated 2-way brass ball valve with threaded ends for water, air, oil and gas; double or single acting.
Consists of a full bore stainless steel monoblock ball valve and an aluminium body rotary pneumatic actuator. The actuator has an ISO 5211 valve interface and a NAMUR interface for solenoid valve, switch box and positioner, plus an open-closed indicator.
| Actuator body | Extruded aluminium, anodised surface, hard anodised |
|---|---|
| Actuator end caps | Die-cast aluminium, blue electrostatic paint |
| Pistons | Die-cast aluminium |
| Control air | 4-6 bar compressed air (air passed through filter, regulator and lubricator recommended) |
| Indicator | Red open-closed valve position indicator on every actuator |
| Interfaces | ISO 5211 valve interface; NAMUR interface for solenoid valve, switch box and positioner |
| Valve body | Full bore, AISI 304/AISI 316 stainless steel |
| Number of ways | 2-way, can be installed in any position |
| O-ring | PTFE around the ball; stem O-rings (two) PTFE |
| Pressure | Designed for low and high pressure |
| Working temperature | -30...180 °C |
| Working pressure | PN25, PN40 bar (NW15…NW100) |
| Test | All valves are tested at 20 bar for 48 hours |
Pneumatically actuated 2-way brass ball valve with threaded ends for water, air, oil and gas; double or single acting.
Pneumatically actuated 3-way L-port brass ball valve with threaded ends for flow diversion; double or single acting.
Pneumatically actuated 2-way stainless steel ball valve with threaded ends for water, air, oil and gas; double or single acting.
Valve assembly operating two threaded stainless steel 2-way ball valves with a single pneumatic actuator; DA or SR.