SCCR-S ISO Magnetic Cushioned Stainless Steel Cylinders
Ø32–Ø125 bore, 25–1000 mm stroke ISO magnetic cushioned pneumatic cylinders made entirely of 316 L stainless steel.
Expflex pneumatic cylinders are actuators that convert the energy of compressed air into linear motion; they are used for pushing, pulling, lifting, clamping and positioning in automation lines. In double-acting models the piston is driven by air in both directions; in single-acting models the return stroke is provided by a spring.
The range covers ISO 6431 profile, tie-rod and square-profile cylinders (TDNC, MDNC, KDNC, KDNT, SC), round cylinders (MA, MA-S, MAC, MA-L, MSA), compact (short) cylinders (SDA, ADVU, AEVU), guided, twin-rod non-rotating and slide table cylinders, as well as multi-mount, miniature and plate-type cylinders. Models with a magnetic piston are suitable for position sensing with cylinder sensors; cushioned models reduce impact at the end of stroke. 316 L stainless steel ISO and round cylinder versions are also available. Bore and stroke ranges are given in the table of each series.
Ø12–Ø100 bore, 10–100 mm stroke single-acting magnetic compact (short) cylinders.
| Bore (mm) | Stroke (mm) |
|---|---|
| Ø12, Ø16, Ø20, Ø25, Ø32, Ø40, Ø50, Ø63, Ø80, Ø100 | 10, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100 |
Ø32–Ø125 bore, 25–1000 mm stroke ISO magnetic cushioned pneumatic cylinders made entirely of 316 L stainless steel.
Ø16–Ø25 bore, 10–500 mm stroke magnetic round (pen) cylinders in 316 L stainless steel.
Ø16–Ø25 bore, 10–500 mm stroke cushioned magnetic round (pen) cylinders in 316 L stainless steel.
Ø32–Ø125 bore, 25–480 mm stroke magnetic cushioned cylinders with non-rotating two-flat piston rod.