KCD Connection Harnesses
KCD harnesses for PHC systems; fuse-protected power line, Deutsch DTM / AMP JPT connectors, -30…+105 °C.
Product code: PHC
PHC plug-and-play electronic control systems; joystick, ECU and harness, 2–6 proportional functions, float, 12/24 V.
PHC (Power Hydraulic Control) systems are complete pre-configured electronic systems made of one or more joysticks, control units and connection harness for driving Walvoil directional valves. Ramp times, float and fast/slow functions are set with WST software; versions with return-to-dig for front-end loaders exist.
| Proportional functions | 2 – 6 |
|---|---|
| Voltage | 12 / 24 VDC |
| Control | Analog, potentiometric or CAN bus joystick |
| Float function | All systems |
| Setup / diagnostics | WST software |
| System | Control signal | Control unit | Voltage (V) | Proportional functions | Digital outputs | Dead man management | Return to dig | Fast-Slow |
|---|---|---|---|---|---|---|---|---|
| PHC400F | Analog (0.5 – 4.5 V) – AJW | CED400W | 12 / 24 | 4 | - | Yes | - | - |
| PHC400C | CAN bus – CJW | CED400W | 12 / 24 | 4 | - | Yes | - | - |
| PHC400P | Potentiometric – 4 single-axis joysticks | CED400W | 12 / 24 | 4 | - | - | - | - |
| PHC200F | Analog (0.5 – 4.5 V) | CED400W | 12 / 24 | 2 | - | Yes | - | - |
| PHC220C | CAN bus – CJW | EME mechatronic control | 12 | 2 | 2 | - | - | - |
| PHC250C | CAN bus – CJW | EME mechatronic control | 12 | 2 | 3 | - | Yes | - |
| PHC251C | CAN bus – CJW | CED252 | 12 | 2 | 3 | - | Yes | Yes |
| PHC640C | CAN bus – CJW | CED400X | 12 / 24 | 6 | 2 | Yes | - | - |
KCD harnesses for PHC systems; fuse-protected power line, Deutsch DTM / AMP JPT connectors, -30…+105 °C.
WST service software and PHC Studio IDE; parameter setting, diagnostics and IEC 61131-3 programming of CED control units.