K4 Adjustable Pressure Switch
Compact mechanical pressure switch with 24 mm hex body; 0.2–400 bar setting range, Fast-on connection, single contact (NO or NC).
Product code: X5
Solid-state electronic pressure switch; 0–400 bar range, ± 1.5% accuracy, adjustable hysteresis, set via 4 buttons.
The X5 series is a fully solid-state pressure switch with changeover contact whose maximum and minimum set points are adjusted with 4 buttons under a cap. It has a ceramic sensor and AISI 316L fluid port; a green/red LED in the transparent connector shows the alarm status.
| Pressure range | 0 – 400 bar |
|---|---|
| Max. pressure | 12 – 600 bar (by type) |
| Body | 30x30 mm anodized aluminium, AISI 316L port |
| Hydraulic connection | 1/4" BSP female |
| Switching accuracy | ± 1.5% of full scale at 20 °C |
| Hysteresis | Adjustable 2–90% of set value |
| Working temperature | -20 °C … +70 °C |
| Supply / load | 24 V DC; max. 0.5 A |
| Protection | IP65 |
| Type | Setting range (bar) | Max. pressure (bar) |
|---|---|---|
| X50 | 0>5 | 12 |
| X51 | 0>10 | 25 |
| X52 | 0>20 | 50 |
| X53 | 0>50 | 120 |
| X54 | 0>100 | 250 |
| X55 | 0>200 | 500 |
| X59 | 0>400 | 600 |
Compact mechanical pressure switch with 24 mm hex body; 0.2–400 bar setting range, Fast-on connection, single contact (NO or NC).
Mechanical pressure switch with changeover contacts (NO/NC); 0.2–400 bar setting range, P3 Fast-on or DIN 43650 M2/M3 connector, IP65.
Pressure switch with 27 mm hex body and changeover contacts; 0.2–400 bar setting range, 1/4" BSP male port, M2/M3 connector, IP65.
Low-pressure switch with large diaphragm and anodized aluminium square body; 0.05–10 bar range, ± 3% accuracy, 1/4" BSP female port.