CVG18N Hydraulic Check Valves
- Thread / connection size
- 1/8" BSP
- Working pressure
- 580 bar
Product code: CVG2N
Hydraulic Check Valves; 2" BSP, working pressure 260 bar.
CV Series Hydraulic Check Valves are two-way valves that allow hydraulic fluid to flow in one direction only along the line. They are also used to bypass throttle points, to block flow in one direction, as tank discharge valves and as preload (holding) valves to create a defined back pressure in circuits. The standard opening pressure is 0.5 bar; check valves with a special 6-8 bar opening pressure are also available.
| Thread / connection size | 2" BSP | |
|---|---|---|
| Working pressure | 260 | bar |
| Cracking pressure | 0.5 | bar |
| Material | Carbon Steel | |
| Sealing | Nitrile O-ring (NBR) | |
| Working temperature | -30 °C and +110 °C | |
| Plating | Zinc Plating (Cr III Passivation) | |
| Standard cracking pressure | 0,5 Bar (6-8 Bar opening pressure optional upon request) | |
| Dimension A | 130 | mm |
| Dimension C | 73 | mm |
| Dimension D | 75 | mm |
| Dimension E | 42 | mm |