FER-RO

HPF10MCG34N Hydraulic High Pressure Filter

Product code: HPF10MCG34N

Hydraulic High Pressure Filter; 3/4", working pressure 350 bar.

Thread / connection size
3/4"
Working pressure
350 bar
Material
Aluminium
Sealing
Nitrile O-ring (NBR)
Working temperature
-30 °C and +110 °C
Hose ConfiguratorNeed a custom crimped hose? Choose type, size, length and fittings and see the price and delivery date instantly.

HPF Series Hydraulic High Pressure Filters are used to prevent unwanted solids and gases, such as particles and air mixed into the oil – the root cause of most problems in hydraulic systems – from damaging the system and causing pressure fluctuations. Filter service life is monitored by the pressure rise in the system; when the pressure exceeds the set value the element is replaced, preventing the system from going into bypass. A larger filtration surface ensures even flow and higher dirt-holding capability.

The following factors should be considered when selecting the ideal filter:

  • Filtration requirement of the most sensitive component in the system
  • Points in the system where the filters will be installed
  • System operating pressure
  • Maximum flow rate and type of fluid to be filtered
  • Duty cycle
  • Dirt-retention efficiency of the filter element
  • Dirt-holding capacity of the filter element
  • Operating temperature

Every filter causes a pressure loss over time; this pressure drop indicates the filter's efficiency index. When the hydraulic system is assembled, all components must be very clean and the filters must be fitted before oil is added. To avoid problems during testing, the system should first be run through several cycles at low pressure.

  • Applications: General hydraulic applications

Related products