CVPHPG18N Hydraulic High Pressure Poppet Type Check Valves
- Thread / connection size
- 1/8" BSP
- Working pressure
- 650 bar
Product code: CVPHPG12N
Hydraulic High Pressure Poppet Type Check Valves; 1/2" BSP, working pressure 460 bar.
CVPHP Series Hydraulic High Pressure Poppet Type Inline Check Valves are two-way valves that allow hydraulic fluid to flow in one direction only along the line. They are also used to bypass throttle points, to block flow in one direction, as tank discharge valves and as preload (holding) valves to create a defined back pressure in circuits. The standard opening pressure is 0.5 bar. Thanks to the steel insert inside, they perform well in short (seconds-long) opening and closing cycles under high pressure, with no leakage and no deformation of form.
| Thread / connection size | 1/2" BSP | |
|---|---|---|
| Working pressure | 460 | bar |
| Cracking pressure | 0.5 | bar |
| Material | Carbon Steel | |
| Sealing | Nitrile O-ring (NBR) | |
| Working temperature | -30 °C and +110 °C | |
| Plating | Zinc Plating (Cr III Passivation) | |
| Standard cracking pressure | 0,5 Bar | |
| Dimension B | 74 | mm |
| Dimension C | AA27 | mm |
| Dimension D | 10 | mm |